Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Brakes/Levers/Pads

$113.00
SRAM's Force CX1 ErgoDynamic levers are descended from the top-end RED, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike. Designed for a 1 x 11 setup, this left-side, brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.
$113.00
Guide T brings consistent performance and reliable stopping power thanks to a revised lever design and lightweight four-piston caliper. Featuring SRAM's Directlink lever, updated master cylinder and timing port closure, all combined to provide a more positive braking system. - Bleeding Edge, drip-free bleed port closure and adaptor to minimize fluid loss - Heat Shield technology to reduce caliper fluid temperature and prevent loss of braking power - MatchMaker compatible for a clean and simplified look - Ambidextrous lever mount design - Lightweight 4-piston dual-diameter caliper - Includes steel-backed organic pads - Front includes 950mm hose - Rear includes 1800mm hose
$111.73
- Complete caliper replacement for Magura systems (no caliper pistons or seals available, must replace caliper). Includes brake pads - 74mm post-mount replacement calipers: if replacing IS-51mm caliper, please use separate adapter for refitment to original application
$110.00
Caliper only - does not include lever or hose. 18mm front or rear. Includes steel-backed organic pads - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: DOT
$109.99
- Exceptional heat management - Rounded edge - UCI approved for road competition - Disc Diameter: 220mm - Hub Compatibility: ISO 6B - Disc Pad Type: Metal or Resin - Disc Technology: 2-piece design
$109.99
The RRL SR transcends the ages by offering a race quality lever without an integrated shifter. The classic styling trademarked by heroes of decades past make this a stylish lever for single speeds, fixed gear or custom applications. Th ergonomically shaped lever is drilled to enhance beauty while reducing weight. Hoods are flat and textured for enhanced grip. A built-in push button quick release system provides cable slack for quick wheel removal or additional tire clearance when conditions get muddy. SPECIFICATIONS - RRL SR - Available with gum or black hoods. - Pull ratio compatible with Spyre and road/cyclocross rim brakes - Sold as a set (left and right)
$109.00
For the stop/start world of cyclocross, Avid makes the inimitable Shorty Ultimate Rim Brake. The ideal balance of power, control and weight, the Ultimates are the choice of pro crossers across the globe. They offer an open design that clears mud quickly while also dishing out serious stopping power and modulation. Just a twist of the in-line cable adjustment knob lets you dial in cable tension, and you can choose between a wide or narrow stance for increased mud clearance or power. And, the Shorty uses standard road cartridge pads for easy maintenance.
$108.00
Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.
$104.99
The Spyre SLC is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 146g per caliper - Carbon actuation arm for maximum rigidity, and weight savings - Dual-piston actuation - Works with ALL cable actuated road levers. Compressionless (linear strand) housing is highly recommended - TRP ultra-grippy semi-metallic pads. These are compatible with Shimano M525/M515 pads - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only
$102.78
Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.
$99.99
Finally: a mechanical disc brake for mountain bikes and fat bikes that offers superior performance and is a snap to set up. The Spyke is a dual-sided mechanical caliper where both pads actuate to provide even and precise clamping force. This results in even pad wear and easy pad adjustment with the addition of a barrel adjuster. No longer is adjusting the whole caliper necessary as the pads wear. All of this in a 169g (per caliper) package that works with all linear-pull levers. Caliper and mounting bolts included. SPECIFICATIONS - Dual-piston actuation - Even pad wear - Easy adjustment and set up - Works with ALL long-pull levers - TRP's own, ultra-grippy, semi-metallic pad that is Shimano M525/M515 compatible, allowing for further customization - Compound works well in dry conditions but may wear quickly in wet/muddy conditions - Rotor and adapters sold separately - Weight: 170g/caliper per wheel
$99.00
The Magura MDR-P is a disc rotor for performance-oriented riders and tough tasks ranging from downhill and ebikes to heavy cargo bikes. It features Dovetail Interlink technology, a patented interlocking of the outer and inner rings. This provides additional support for the inner ring if the outer ring expands due to heat. In contrast to floating discs, the torque is transmitted to the dovetail-shaped toothing over its entire surface instead of just the rivets, increasing the rigidity of the brake disc and the degree of heat dissipation under continuous load. The MDR-P is the most powerful brake disc in the Magura portfolio, yet it still offers riders low weight and reduced vibration. - Perfect for demanding applications such as ebike or downhill riding - Two-piece design offers the highest level of heat dissipation and high torque transfer - Wear optimized ring design - Prepared for tone wheel or magnet
$97.99
The Shimano Ultegra BR-R8100 series caliper brakes offer a clear contact feeling while balancing rigidity, weight, and stopping power. With clearance for 28mm tires, the design is still sleek. They are available in traditional and direct mount options. - Exceptional balance of rigidity, weight and stopping power - Maximum tire size is 28C - Sleek and integrated low-profile caliper design - 51mm reach
$97.99
The Shimano Ultegra BR-R8100 series caliper brakes offer a clear contact feeling while balancing rigidity, weight, and stopping power. With clearance for 28mm tires, the design is still sleek. They are available in traditional and direct mount options. - Exceptional balance of rigidity, weight and stopping power - Maximum tire size is 28C - Sleek and integrated low-profile caliper design - 51mm reach
$97.84
Magura MT eSTOP disc brake calipers - MagnetiXchange pistons for easy brake pad replacement - Rotatable tube connection - Includes brake pads
$96.00
Magura service kits come in a variety of packages to fit your needs.
$95.99
- Optimized for Race Pads - Optimum heat dissipation - High durability - Wear indicators - Rounded edge - UCI approved - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Steel - Disc Technology: 2-piece design
$95.71
Magura service kits come in a variety of packages to fit your needs.
$95.00
This upgraded version of the BB7 has a durable anodized finish and stainless steel hardware. - For use with with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed organic pads - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 204 g
$95.00
This upgraded version of the BB7 has a durable anodized finish and stainless steel hardware. - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Due to the shape of the brake pad installation tabs, this model is not compatible with Centerlock or HSX rotors - Includes steel-backed organic pads - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 204 g
$85.99 - $94.99
- Shimano's flagship disc brake rotor, now available in ISO 6-Bolt mounting version - Features ICE TECHNOLOGIES FREEZA, a proprietary fabrication technique consisting of a 3-layer aluminum and stainless steel structure and special high heat dissipating treatment allowing for superior cooling and performance - Reduced power fading ensuring consistent high performance even on long downhill stretches - Helps increasing brake pads life and reducing noise
$94.99
Shimano SLX BR-M7120 hydraulic disc brake calipers offer powerful braking performance in a 4-piston design that's optimized for tough enduro trails. - High power braking instills greater downhill confidence and control - Banjo type connection and inside hose routing - Quick and easy assembly
$94.57
Replacement lever blades for Magura disc brakes
$92.00
- Replacement caliper for Force eTap AXS
$92.00
Level T capitalizes on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank. This budget-minded, MatchMaker-compatible brake set provides all the power of its siblings, keeping you in complete control.
$90.91
Magura sleeve nut - for ebike use pack of 10 - Small parts used to install hydraulic hose for Magura disc brakes.
$90.00
SRAM's Rival 22 Brake Caliper Set delivers competition-ready speed control, low weight and lovely streamlined aesthetics that will enhance any road bike. Featuring a powerful dual-pivot design and cold-forged-aluminum construction, the Rival brakes offer excellent stopping power. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick-release and adjustment barrel.
$89.99
The Spyre is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine-tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 154g per caliper - Dual-sided actuation - Works with ALL cable-actuated road levers. Compressionless (linear strand) housing is highly recommended - Comes with TRP ultra-grippy semi-metallic pads - Calipers are compatible with Shimano M525/M515 pads - 160mm rotors recommended on front wheel - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only
$89.70
- Kit includes full-fluid capture bottle, bleed fittings, hose, syringe and 16oz Magura fluid
$89.37
Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.